Communications for today... and tomorrow.

Central Monitoring

Adding features to the Tek-CARE^®500 Wireless Emergency Call System

The next big added feature to TekTone^®’s wireless emergency call system provides an interface for transmitting alarm messages to a central monitoring station. The new NC502 PC-Alarm Panel receives alarm messages from the Tek-CARE^®500 Master Station Computer via an RS-232 connection, and then transmits the messages over a standard telephone (POTS) line to a central monitoring facility.

The Tek-CARE^®500 system must have software version 1.5.0.597 or later.

The following features are available with the NC502:

• Uses Ademco ContactID Protocol
• Generates all DTMF signals necessary for communication
• Decodes handshake and kiss-off tones from the monitoring station
• Transmission status is reported back to the TekTone^® Tek-CARE^®500 system
• Connections are isolated via mechanical relay, opto-coupler and telephone coupling transformer
• Transmission over “Plain Old Telephone Service” (POTS) line
• Straight serial cable, USB to serial adapter, power adapter with cord, and phone cable are included
• NC502 is external to the NC501 Master Station Computer

More information is available in the IL851 specification sheet and the IL815 installation manual.

TekTone^® Sound & Signal Mfg., Inc.
277 Industrial Park Road Franklin, NC 28734 USA
Phone: (828) 524-9967 Fax: (828) 524-9968
Sales: (800) 327-8466 Tech Support: (800) 332-6608